Immersion Heaters
CTS has developed a full line of winterization kits. We provide both screw type heaters with thermostats and bottom mount heaters with control panels. These are installed in the basin of the cooling tower to protect them from freezing during the cold weather months.
Cooling tower operation is often required in freezing weather for either comfort air conditioning in the central core of a large building, or for industrial processes. To protect the cooling tower from freezing during shutdown periods, Cooling Tower Systems has developed a full line of winterizing heaters. Those shown in this section are used when heat distribution is required over a long length, or when a bottom mount construction is required, as in ceramic, concrete or fiberglass basin. 2" pipe thread heaters, with copper tubular elements are commonly used in the sump when full-length distribution is required.
Screw type immersion heater installation: Immersion heater can be installed in the cold water basin. You can drill hole for your bulk head fitting between the over flow drain and inlet water pipe fitting on the water basin. Please click here for manual.
Please fill out the form below and allow 24-48 hours for quotation.